Connect With Us:
The Fog device
The fog device consists of an electric motor
and a pressure pump
It is powered by an electric feed and has a timer
that works with options of seconds, minutes and hours
The device also includes a double water filter to protect
the system from clogs that may occur due to water pollution.
DIAGRAM
The Accessories
Metal extension
Water Fog Fan
|
V |
Hz |
Repetition Hz |
AIR FLOW (M3 /H) |
||||
|
LOW |
MIDEOM |
HIGH |
LOW |
MIDEOM |
HIGH |
||
|
220 |
50 |
165/150 |
192/170 |
230/215 |
7500/10000 |
10000/12000 |
13000/14800 |
Stainless Steel Fog columns
RGT-C1
- The fog column contains 6 bases distributed along the horizontal metal holder at the top of the column, on which 18 stainless steel atomizers are distributed.
- The column is made of 304 stainless steel and is installed in open or semi-closed sessions to cover 8 meters directed towards targeted sessions of up to 30 meters.
(The coverage size and direction varies with the direction and speed of the wind).
- Columns can be installed on dirt floors, where a hole is created 30-50 cm deep and a concrete mix is spread to ensure optimal stability of the columns. The columns can also be installed on concrete floors by creating a base under the floors with a depth of 25-30 cm.
- Columns can be installed at the edges of the sessions and directed towards the sessions, regardless of their distance from the wall.
RGT-C2
- The fog column contains 6 bases distributed along the horizontal metal holder at the top of the column, on which 6 stainless steel atomizers are distributed.
- The column is made of 304 stainless steel and is installed in open or semi-closed sessions to cover 4 meters (the coverage size and direction varies according to the direction and speed of the wind).
- Columns can be installed on dirt floors, where a hole is created 30-50 cm deep and a concrete mix is spread to ensure optimal stability of the columns. The columns can also be installed on concrete floors by creating a base under the floors with a depth of 25-30 cm.
This column is a classic and can be installed in small spaces.
- A lantern can be added at the top of the column at the request of the customer.
RGT-B6
- The fog column contains 6 sprays distributed on two triangular bases on the ends of the column, which is formed in the form of two branches of a palm tree.
- The column is made of 304 stainless steel and is installed in open or semi-closed sessions to cover 8 meters, directed at an angle of 60 degrees towards the targeted sessions
(The coverage size and direction vary with the direction and speed of the wind).
- Columns can be installed on dirt floors, where a hole is created 30-50 cm deep and a concrete mix is spread to ensure optimal stability of the columns. The columns can also be installed on concrete floors by creating a base under the floors with a depth of 25-30 cm.
- Columns can be installed at the edges of the sessions and directed towards the sessions, regardless of their distance from the wall.
RGT-B12
The fog column contains 12 sprays distributed in 4 triangular bases at the tips of the shaft that is shaped like a palm tree.
- The column is made of 304 stainless steel and is installed in open or semi-closed sessions to have a circular coverage with a diameter of 4-6 meters (the coverage size and direction varies according to the direction and speed of the wind).
- Columns can be installed on dirt floors, where a hole is created 30-50 cm deep and a concrete mix is spread to ensure optimal stability of the columns. The columns can also be installed on concrete floors by creating a base under the floors with a depth of 25-30 cm.
- When installing columns, a separation distance of at least 3 meters must be observed at the nearest wall.
RGT-U36
(Fog canopy)
- The fog canopy contains 36 Nozzles distributed on 12 tripods around the canopy perimeter
- The column is made of 304 stainless steel and its installed in open or semi-closed sessions to have a circular coverage with a diameter of 20 meters (the coverage size and direction varies according to the direction and speed of the wind).
- A wooden decor can be added to the canopy around the awning and the top of the canopy to block direct sunlight from the session, based on the client's request.
- Columns can be installed on dirt floors, where a hole is created 30-50 cm deep and a concrete mix is spread to ensure optimal stability of the columns. The columns can also be installed on concrete floors by creating a base under the floors with a depth of 25-30 cm.
- When installing columns, a separation distance of at least 6 meters must be observed at the nearest wall.
• column diameter 2 inches
• column type 304. stainless steel
• Column height 250 cm
• Total number of sprays 36 nozzles
• The coverage ratio is circular with a diameter of 25 meters
• The installation in the middle of the target site
Electrical circuit Parts
2:LS Contactor (MC-12b):
3:LS Overload (MT-32):
4:GRT Timer:
5:Pneumatic Solenoid Valve:
Model NO. 2W160-15 electric solenoid valve
Power Supply AC Solenoid Valve
Usage Flow Control
Standard GB
Application Industrial Usage, Water Industrial Usage
Port Size 1/2"
Fluid Temperature 0-150c
Acting Type Direct Acting
Fluid Pressure 0~1.0MPa
Seal Material NBR, EPDM or Viton
Port Numbers 2
N/C or N/O Normally Closed Electric Solenoid Valve
Certificates Ce, ISO, RoHS
Specification CE, ROHS, ISO9001
Origin China
6:Low Pressure Switch:
7:Knob Selector Switch (2 Position):
8:LED Power Indicator Pilot Signal Light Lamp:
Specifications:
All mentioned items (items 1-8) are installed inside the steel box, and can be installed in an external control panel separate from the motor and pump, except for items 5 - 6 (as requested by the customer).
Water Consumption Calculation
The upgraded nozzles are characterized by their ability to save water consumption to the maximum, as they contain a drip stop that automatically closes the nozzle when the device stops working.
Consumption is calculated according to the following table:
|
Orifice size |
Pressure (PSI) |
Water Consumption (LPM) |
|
0.15 mm |
1000 |
0.047 |
|
0.20 mm |
1000 |
0.076 |
|
0.30 mm |
1000 |
0.118 |
|
0.40 mm |
1000 |
0.163 |
Example: use 100 nozzles (size 0.15 mm)
100 x 0.047 = 4.7 LPM = 282 LPH
When the duration of the downtime is equal to the duration
of the operation, the number becomes divided by 2
100 x 0.047 ÷ 2 = 2.35 LPM = 141 LPH
Warranty Policy
warranty period:
From the date of installation
• Warranty period of 2 years for the product, Includes the damage from manufacturing.
• Warranty for motors and pumps is two years.
• Providing supplies and spare parts for a period of five years.
Warranty Policy:
General rules and conditions:
1. The original contract must be provided.
2. Warranty means that the product has been approved for repair, Replacement is only for products that cannot be repaired, and in the event of a manufacturing defect in the product, within six days from the date of installation, the product can be exchanged or returned.
3. The product must be within the warranty period, and under the original sales invoice.
4. The warranty covers any manufacturing defect of the product, and does not include any malfunction caused by misuse.
5. The warranty does not cover consumables that must be replaced or replaced periodically.
6. Warranty is voided in case the product is serviced at centers not approved by Rusukh.
7. Installation, operation and periodic maintenance is carried out (for a company/companies) officially approved by Rusukh Company.
8. The warranty does not include any additional damage resulting from the delay in reporting to request a product repair.